jump to navigation

Plates with Colored Porcelain Inlay April 5, 2012

Posted by Elena in ceramic, ceramics, porcelain, pottery, Process, wheel thrown.
Tags: , , , , ,
add a comment

These plates started as a slab. I prepared colored porcelain by overlaping multiple strips of different colors and rolled in a coil. I then cut this slices of colored coil (~2 mm thick) and layed them out on slab. Using pony roller I slowly rolled the pieces into the slab taking care not to thin out the slab. Then I cut out the circle and paced it upside down on a hump hydro-bat mold (The Ceramic Shop, Philadelphia), and threw the plate on a wheel. I then added a thin coil and threw a foot ring.

After bisque firing, the plates were finished with a clear glaze and blue glaze sprayed in the middle, and fired in reduction at cone 10.

Advertisements
%d bloggers like this: