jump to navigation

Plates with Colored Porcelain Inlay April 5, 2012

Posted by Elena in ceramic, ceramics, porcelain, pottery, Process, wheel thrown.
Tags: , , , , ,
add a comment

These plates started as a slab. I prepared colored porcelain by overlaping multiple strips of different colors and rolled in a coil. I then cut this slices of colored coil (~2 mm thick) and layed them out on slab. Using pony roller I slowly rolled the pieces into the slab taking care not to thin out the slab. Then I cut out the circle and paced it upside down on a hump hydro-bat mold (The Ceramic Shop, Philadelphia), and threw the plate on a wheel. I then added a thin coil and threw a foot ring.

After bisque firing, the plates were finished with a clear glaze and blue glaze sprayed in the middle, and fired in reduction at cone 10.

Advertisements

Sugar and Creamer February 17, 2012

Posted by Elena in altered, ceramic, ceramics, porcelain, pottery, wheel thrown.
Tags: , , , , , ,
add a comment

Sugar and Creamer. Porcelain, wheel thrown and altered, cone 10 reduction.

 This set was thrown on the wheel and then altered. The tray was thrown as a disc and stretched. It was then fit into the mold with two round bisque weight to define the sitting places for sugar and creamer, and the rim was shaped. The sugar was thrown as a closed form and the lid was cut out at the leatherhard stage.

Covered Jar January 7, 2012

Posted by Elena in altered, ceramic, ceramics, pottery, stoneware, wheel thrown.
Tags: , , , , , ,
add a comment
Red stoneware; 7.5″h, 4″w, 4’d; thrown, altered and carved; cone 10 reduction.

This piece was thrown and the slab legs/sides were added. Then the walls were carved. The lid is slab built. I saw a similar design in a gallery and wanted to recreate it. It was fun to make, except the slab work takes too long. This jar had a little fat brother but its leg exploded during the bisque firing because the venting hole I made was too small. The surface treatment is iron oxide and Shino.

%d bloggers like this: